Tecno 7C Pro Stock ROM

FREE Download Tecno 7C Pro Flash File from here. The Tecno 7C Pro stock ROM attached have been tested. However, if you have issues using the firmware, you may ask us for help.


Tecno 7C Pro Stock Firmware

Tecno 7C Pro Flash File Details

  • Category : ROM
  • Type : Stock ROM
  • ROM Size : Unknown
  • Target : Tecno 7C Pro
  • PC/OS : Windows/Linux PC
  • Status : Ready
  • Server : External
  • Tecno 7C Pro Flash File


    Tecno 7C Pro Firmware Download Link

    7C Pro-DP7CPRO-KC07T-A1-L-20160513 7C Pro-DP7CPRO-KC07T-B2-L-20161020

    NOTE | You can now gain access to all our phone software repair files. Learn more



    How to Flash Stock ROM On Tecno 7C Pro


    1. To flash stock ROM on Tecno 7C Pro using SP Flash Tool, first, Download SP Flash Tool here. You may see the installation instructions on the same page.


    2. Now, download USB VCOM drivers from here. Also, see the USB VCOM drivers installation instructions on the page.


    3. Then, download Tecno 7C Pro firmware here. NOTE: Skip this if you have downloaded the firmware earlier.


    4. Extract the firmware you downloaded from step 3 above onto a folder on your PC.


    5. Now, RUN (Launch) SP Flash Tool on your PC.



    6. Click the Download tab. If it's on Download tab by default, proceed below.



    7. Once SP Flash Tool GUI is loaded and you're on the Download Tab, click Scatter Loading.



    8. Now, navigate to the folder where the flash file is saved and select your scatter-file.



    9. Select Download from the options.



    10. Mark all the firmware partitions loaded except the Preloader, cache and the Userdata.



    11. Click Download.



    12. Now, Power off the device or remove battery from it; whichever is possible.


    13. Finally, connect the device to your PC and tap the Power button just once.


    14. Now, watch SP Flash Tool progress bar until it completes the whole operations.


    15. Once done, the device may reboot. You may then disconnect the device from the PC. NOTE: if the device does not reboot once done, just disconnect the device, remove the battery, re-insert the battery and power-on the device.


    16. Succeeded! You have just succeeded at flashing your Tecno 7C Pro using SP Flash Tool.


    Video Tutorial: How to Flash Tecno 7C Pro Using SP Flash Tool



    Also check:

    Similar Flash Tools, Miracle Box, All Tecno Firmware

    0 Comments