Tecno W5 Lite Stock ROM

FREE Download Tecno W5 Lite Flash File from here. The Tecno W5 Lite stock ROM attached have been tested. However, if you have issues using the firmware, you may ask us for help.


Tecno W5 Lite Stock Firmware

Tecno W5 Lite Flash File Details

  • Category : ROM
  • Type : Stock ROM
  • ROM Size : Unknown
  • Target : Tecno W5 Lite
  • PC/OS : Windows/Linux PC
  • Status : Ready
  • Server : External
  • Tecno W5 Lite Flash File


    Tecno W5 Lite Firmware Download Link

    W5 Lite-H8010A1-M-161014V147 W5 Lite-H8010B1-M-EG-161115V93 W5 Lite-H8010A1-M-161027V178 W5 Lite-H8010A1-M-170313V376

    NOTE | You can now gain access to all our phone software repair files. Learn more



    How to Flash Stock ROM On Tecno W5 Lite


    1. To flash stock ROM on Tecno W5 Lite using SP Flash Tool, first, Download SP Flash Tool here. You may see the installation instructions on the same page.


    2. Now, download USB VCOM drivers from here. Also, see the USB VCOM drivers installation instructions on the page.


    3. Then, download Tecno W5 Lite firmware here. NOTE: Skip this if you have downloaded the firmware earlier.


    4. Extract the firmware you downloaded from step 3 above onto a folder on your PC.


    5. Now, RUN (Launch) SP Flash Tool on your PC.



    6. Click the Download tab. If it's on Download tab by default, proceed below.



    7. Once SP Flash Tool GUI is loaded and you're on the Download Tab, click Scatter Loading.



    8. Now, navigate to the folder where the flash file is saved and select your scatter-file.



    9. Select Download from the options.



    10. Mark all the firmware partitions loaded except the Preloader, cache and the Userdata.



    11. Click Download.



    12. Now, Power off the device or remove battery from it; whichever is possible.


    13. Finally, connect the device to your PC and tap the Power button just once.


    14. Now, watch SP Flash Tool progress bar until it completes the whole operations.


    15. Once done, the device may reboot. You may then disconnect the device from the PC. NOTE: if the device does not reboot once done, just disconnect the device, remove the battery, re-insert the battery and power-on the device.


    16. Succeeded! You have just succeeded at flashing your Tecno W5 Lite using SP Flash Tool.


    Video Tutorial: How to Flash Tecno W5 Lite Using SP Flash Tool



    Also check:

    Similar Flash Tools, Miracle Box, All Tecno Firmware

    0 Comments